Home

DISM Remove feature

Disable-WindowsOptionalFeature (DISM) Microsoft Doc

The Remove parameter removes the files for an optional feature without removing the feature's manifest from the image. You can use Remove to reduce the disk space that is used by a Windows image. After the image has been installed, you can restore the feature at any time from a remote source such as Windows Update or a network share Under the /Disable-Feature section states: Use /Remove to remove a feature without removing the feature's manifest from the image. This option can only be used can be used with Windows 10, Windows 8.x, and Windows PE images above 4.0. The feature will be listed as Removed when you use /Get-FeatureInfo to display feature details and can be restored and enabled using /Enable-Feature with the /Source option

You can use DISM to remove (or install) certain features from your Windows 10 installation image. Get the list of preinstalled components in the mounted Windows 10 installation image using DISM: Dism.exe /image:c:\mount /Get-Capabilities. A component may be installed or disabled (Not Present) How to remove Pre-installed Applications? Via PowerShell or DISM. In this guide, you will learn how to remove packages in an install.wim image. 1: DISM: It makes sense to query the Windows image to get the pre-installed apps and this can be achieved using any of the commands below. dism /Image: <MountedDir> /Get-Provisionedappxpackage Finally, perhaps it's been decided that using BITS is not necessary, therefore we need to remove the feature from the operating system. Disable-Feature. To simply remove a feature, it's essentially the same as Enable-Feature but the inverse. dism /Online /Disable-Feature /FeatureName:BIT

We've deployed some 2016 Servers from Templates, all seems well, i have 1 though which happens to be an SCCM primary site which has grave DISM errors when i try to remove or add components. A DISM Session could not be opened %1 is not a valid Win32 Application. Error 0x800700c1 Any repair commands return: Error: 193 An initialization error occurred Note that the get-features table is localized. So if you use e.g. a German version of Windows 10, replace Disabled with Deaktiviert for this command to actually remove features. To double-check, display the table first: dism /online /get-features /format:tabl C:\Windows\system32>DISM /Online /Disable-Feature /FeatureName:NetFx3 /remove /remove - removes payload. From now on I failed to install the feature again trying the following two alternatives. CMD. DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:D:\sources\sxs Powershel Remove reboot request for DISM. Ask Question Asked 5 years, 7 months ago. Active 5 years, 7 months ago. Viewed 12k times 9 I want to automate the upgrade of my 2012 R2 servers from standard to datacenter. However, there is a prompt at the end of the upgrade waiting for a user response. I have thousands of servers to do and cannot press Y at the end of it... any ideas how I can get the prompt.

To remove uninstallable updates using the DISM tool, use these steps: Open Command Prompt (admin) window. Enter the following command: dism /online /get-packages | cli View, Add or Remove Windows Features Via Command Prompt. It's easily achievable to get information about, as well as install or remove features from the command line. This is possible by using the DISM (Deployment Image Servicing and Management) tool The second choice to add or remove Windows 10 Features on Demand is using DISM /Add-Capability. This DISM command not only helps you add the non-satellite FODs but also satellite FODs. This DISM command not only helps you add the non-satellite FODs but also satellite FODs

Windows 10 Dism /Disable-Feature /Remov

To completely remove Windows Defender from the Windows Server 2016, you can use one of the following methods: Method 1. Uninstall Windows Defender using PowerShell. Method 2. Remove Windows Defender in Server 2016 using DISM command prompt (DISM). Method 3. Remove Windows Defender using the Remove Roles & Features wizard. Method 1. Uninstall Windows Defender using PowerShell If you were to use DISM.EXE commands to remove .Net Feature, you may not even see such a list. If you were to use PowerShell to remove .Net feature using the following command, you will not get the list. Uninstall-WindowsFeature Net-Framework-45-Features. If you were to use Remove-WindowsFeature PowerShell cmdlet, you can add the -whatif switch to see the list of features that would also be. Remove Feature - Installation Status After invoking remove feature, when the feature is getting uninstalled, current un-installation progress is shown on the host. After un-installation of the feature task is completed, installation status is displayed and if the un-installation was completed without any errors, Exit Code will be shown as Success Uninstalling extraneous language optional features on Windows 10. 2017/12/28 When you uninstall a language on Windows 10, it leaves the optional features installed, like speech recognition If you want to do any tasks like capture, split, or manage .wim files, DISM can also help you. Besides, the DISM tool allows you to install, uninstall, configure, and update things like drivers, Windows features, packages, and international settings (in a .wim file or .vhd/.vhdx). These operations can all be done easily through DISM servicing commands

Removing Feature Packages is much easier than adding them as this can be done directly in the running system. Open an administrative command prompt by pressing the Windows key to open the start menu. Type: cmd and press Ctrl+Shift+Enter; Click Yes to open the command prompt. Type the following command to identify installed feature packages: DISM /Online /Get-Package Removal from a PowerShell prompt. Windows 8 and higher and Windows Server 2012 and higher ship with a PowerShell module for managing installed features that mirrors the DISM.exe command line functions. The following PowerShell script uses the DISM Module to remove any MSMQ features form the system Deployment Image Servicing and Management (DISM) ist Bestandteil von Windows 7/8 und Windows Server 2008/2012. Admins können mit seiner Hilfe Windows-Images (WIM) auslesen und bearbeiten, ohne dass das Windows Automated Installation Kit (WAIK) auf dem entsprechenden Rechner installiert sein muss.. Die Fähigkeiten des Kommandozeilenwerkzeuges umfassen unter anderem das Ein- oder Abschalten.

(日本語字幕) I LOVE

How to Remove Built-in Apps, Features & Editions from a

  1. Disclaimer: Win10 sucks. My question: Where do I get DISM packages to install server 2016 features offline? I need the Source/Package/Image for a specific feature in Server 2016. I can't figure out where to obtain this data. I need to do this: How To Bac
  2. To get a list of features you can type in dism /online /get-features | more and hit Enter. The output will be similar to this: To enable a feature you need the full feature name as displayed on the previous /get-features command. The full feature name is case sensitive! Once you have the full feature name type in dism /online /enable-feature.
  3. i am sharing dism commands to disable certain recommended windows builtin features through DISM ONLINE first connect the computer to the internet and then if you want.
  4. Short of running dism /online /disable-feature /remove /featurename:featurename on every feature I'd like to prune, is there a way of removing the payload on disk for all disabled features? windows disk-space-utilization dism. Share. Improve this question. Follow edited Sep 15 '16 at 23:54. Ben Voigt. 455 4 4 silver badges 20 20 bronze badges. asked Feb 25 '13 at 18:17. Martytoof Martytoof.
  5. I'm try to remove the windows defender from all servers but its failing on some servers when running the dism tool. Dism /onlin... | Windows Serve

Hello, OS : Windows Server Standard GUI 2016 (With April patch) I hope someone can help me , i want to add or remove features but i have error. I try to.. It is actually pretty easy to use Windows PowerShell to remove unneeded features from your VHDs. (This technique also works for WIM images.) One of the cool things about using the DISM cmdlets is that it permits me to work with optional features in a supportable and reliable method. In the old days, I had to worry about dependencies and hope.

Y ou can offline service an image using DISM and enable/disable a feature on the mounted ones. In this short article, let us see on how we can do the same. To do these operations, you should mount the Wim image first. If you arent aware on the steps, then do check this article dism /online /enable-feature /all /featurename:server-gui-mgmt As you can see below, the server manager is now re-installed and can be used to install, configure and manage server roles and features

Remove Windows 10 Apps with DISM: How to remove pre

The features for .NET 3.5, 3.0 and 2.0 as well as PowerShell Version 2 are removed in a standard build of Windows Server 2012 R2 and later. In theory, these features should be acquired from Microsoft through Windows Update by default with no action on your part. In practice this happens sometimes but not others. I have witnessed it. The Issue. Sometimes using following command to remove/delete/uninstall Hyper-V can fail. Remove-WindowsFeature -Name Hyper-V The Fix. 1 Use Win + X key combination to launch WinX menu, then click on Windows PowerShell(Admin) or Command Prompt(Admin) to launch PowerShell or Command Prompt in Admin mod

Selected Windows optional features will be removed from offline image. Save changes . Save changes to Windows image. 1.) Enter the following command to save changes to your Windows install media: Dismount-WindowsImage -Path C:\Mount -Save Change the path to your mount point according to the actual one. 2.) Optional Windows features in selected Windows edition have been added or removed as you. To restore removed features. If the files are not found in the default location, DISM will contact Windows Update (WU) for the required files. You can use the /LimitAccess argument to prevent DISM from contacting WU. If you specify multiple /Source arguments, the files are gathered from the first location where they are found and the rest of the locations are ignored. Dism /Online /Enable.

How to use the DISM Tool to Manage Windows Feature

We've deployed some 2016 Servers from Templates, all seems well, i have 1 though which happens to be an SCCM primary site which has grave DISM errors when i try to remove or add components. A DISM Session could not be opened %1 is not a valid Win32 Application Delete the registry keys and then remove the windows feature and rsat Remove via wusa Remove via DISM Remove via Programs and Features > Add/Remove Windows Features The only way I could remove KB2693643 and the RSAT windows features are as follows: 1. Open command prompt as administrator 2. run DISM /Online /Get-Packages 2a. Copy and paste the output into a txt document such as notepad 3. Run. Der Kommandozeilen Befehl DISM ist - seit Windows 7Vista - Bestandteil des Microsoft Betriebssystems Windows. Der Befehl dient zur Reparatur und Administration verschiedener Windows Komponenten und der Vorbereitung und Bereitstellung von Windows PE-Images. Blog-Leser Thomas B. hat sich die Mühe gem Posted August 17, 2015. Hello. I have been trying to use Win10 DISM to try to slim down an install.wim. To my horror, even with the /remove parameter, DISM refuses to remove any packages' payload; it just shows up as Disabled, not Disabled with payload removed. Removing Features or Provisioned Appx Packages work fine mitchpowell2 wrote: that got it thanks for the key ReAI579 i had to remove both fr-FR and de-DE values from the key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\PackageDetect] and i am now able to add roles and features

With dism you can delete everything from wim except: Thanks a lot for the detail reply but is it possible to remove features / services from.. To open the Windows Features screen, go to Run -> optionalfeatures (This can also be accessed by opening Start Menu -> Control Panel -> Programs and Features -> Turn Windows features on or off); To enable a feature, check the checkbox beside the component. To disable a feature, un-check the checkbox beside the component

DISM Add or Remove Features Error with Server 2016 x64 Bi

Note: You can't restore or remove a Windows feature for features on demand with an unattended answer file. 6. Click Tools on the main menu, and then click Validate Answer File Removing first round of RSAT features - some features seems to be locked until others are removed first Removing second round of RSAT features Also wie ich schon vermutet hatte, hat das was mit. The Disable-WindowsOptionalFeature cmdlet disables or removes an optional feature in a Windows image. Use the Online parameter to specify the running operating system on your local computer, or use the Path parameter to specify the location of a mounted Windows image. The PackageName parameter specifies the package that the feature is a component of. This parameter is optional when the package.

Windows Server 2019: Remove unused features and roles from

View, Add Or Remove Windows Features Via PowerShell – DomJin

The Offline Servicing for custom Windows images feature in Configuration Manager 2012 allows you to install Software Updates offline, like described in an earlier blog. From the Configuration Manager 2012 there is no option to remove installed the software update. But there is a way, let's see if it the right way;) If we go back to the future we always could use tools like DISM or Imagex to. I'm trying to deploy some Windows 10 machines at work, and need to remove or disable the pre-installed apps. For some reason, management feels that the Xbox app and Candy Crush Soda Saga (etc.) shouldn't be installed on a corporate workstation I had the same issue on a Server 2016 VM. After much hunting and Dism recovery commands failed to resolve it, I ended up setting up a new VM, migrating all of the roles, and removing the faulty one. Not what you wanted to hear but it sounds like the Windows image is badly damaged You can add or remove optional Windows features with Settings, DISM, PowerShell, or by using the appropriate classic Control Panel applet. Let's review these methods. To manage optional features in Windows 10, do the following. Open the Settings app. Go to Apps > Apps & features. On the right, click on the link Manage optional features Microsoft DOESN'T RECOMMEND REMOVING IT !! Discord https://discord.me/bobpony Twitter https://twitter.com/TheBobPony Check out https://bobpony.co

powershell - Installing Removed Windows Features - Stack

windows - Remove reboot request for DISM - Server Faul

The request to add or remove features on the specified server failed. Installation of one or more roles, role services, of features failed. One of the several parent features are disabled so current feature can not be installed. Error: 0xc004000d How to Install .NET Framework 3.5, 2.0 & 3.0 on Server 2016. Method 1. Specify an Alternative. Go to Control Panel and open Programs and Features (Add and Remove for XP), find the version of .NET you believe has an issue and double click on it or select Change/Uninstall. This will popup a window similar to above and ask ask if you want to Repair or Remove. Obviously you can try to Repair first, if that doesn't work try a Remove and reinstall. 2. Microsoft .NET Framework Repair Tool. Type regedit.exe and click OK. Go to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU. In the right-pane, if the value named UseWUServer exists, set its data to 0. Exit the Registry Editor. Restart Windows. See if you're able to install .Net Framework 3.5 or any optional features now DISM - Add or Remove Drivers on an Offline Image How to add or remove hardware device drives on an Offline Image with DISM Published by Kari Kalsarikänni Finn. 28 Jan 2018 Information. Servicing an offline image, mounting an image, committing changes, it all sounds a bit complicated to an average Windows user. However, it's just geek speak meaning modifying default Windows install image.

How to uninstall Windows 10 updates manuall

  1. istrator .Tip: You can add Open PowerShell As Ad
  2. 13. When the changes are committed back, open Task Manager again and from the File menu, choose Run New Task, type explorer.exe and hit OK.. 14. Finally, give the following command to install the Windows Defender feature in Server 2016
  3. According this link I am gonna install IIS Windows features inorder to offline mode. I have mounted my install.wim and so on like above link. But when i run this command : Dism /Image:C:\test\of..
  4. Tina Follow us. Position: Columnist Tina is a technology enthusiast and joined MiniTool in 2018. As an editor of MiniTool, she is keeping on sharing computer tips and providing reliable solutions, especially specializing in Windows and files backup and restore
  5. Similarly, to install other optional features using DISM, refer blog post Adding features (including .NET 3.5) to Windows 10 - Michael Niehaus' Windows and Office deployment ramblings as well as Microsoft Docs articles DISM Capabilities Package Servicing Command-Line Options & Available features on deman
  6. In this article we will talk about the WinSxS folder in Windows, the reasons of its constant growth and ways to clean up it. The C:\Windows\WinSxS directory is the repository of Windows components. This directory contains DLLs, binary and XML files necessary for installation and operation of various Windows roles or features
  7. ) in the search result list. Step 2 (optional). Type the following commands to clean up the component store and analyze its size. Please remember to hit Enter after each command

It will delete junk files and identify PC errors that might be affecting your computer's performance. Quick fix instructions. Step 1: Download Installation file. Step 2: Install PC Repair and scan your PC. Step 3: Click Repair to fix all items that may cause the issue. Download PC Repair After it's execution, DISM creates a log file named CMS.log at C:\Windows\Log\CBS directory (e.g. C:\Windows\Log\CBS\ CBS.log), that captures any issues found, when DISM command tool is executed. So, the last method to fix DISM's Source Files Cannot be Found error, is to examine the CBS.LOG file, in order to find out and remove the installed package(s) that causes the problem The DISM log file can be found at C:\Windows\Logs\DISM\dism.log Windows couldn't complete the requested changes. Windows couldn't connect to the Internet to download necessary files. Make sure that you're connected to the Internet, and click Retry to try again. Installation of one or more roles, role services, or features failed. The source files could not be found. Try installing the roles. How to remove windows features with the dism command. John Cartwright March 16, 2017 0 Comments. These commands used in a Administrator cmd prompt will cleanup any Windows update files and any other unwanted temporary files on your Windows system. dism / online / cleanup-image / spsuperseded cleanmgr / d C: In my case, there were no Windows Updates to cleanup. Windows Update cleanup. dism.

Add or Remove Windows Features Via Command Prompt or

  1. PSA: Server 2022 servicing (DISM/Add or Remove Features) is broken with the current release of Palo Alto Cortex XDR. Close. 2. Posted by. Senior Systems Engineer. 1 day ago . PSA: Server 2022 servicing (DISM/Add or Remove Features) is broken with the current release of Palo Alto Cortex XDR. So, I posted a while back about some issues I was having with DISM after removing IE from Server 2022.
  2. Find out how to remove Windows 10 related updates from Windows 7 and Windows 8 systems. Deleting temporary files and folders improves system performance by increasing hard disk space and reducing the time Windows takes to access the hard drive. DISM can preload Windows Update packages into your images. This guide will show you how to use DISM.
  3. These features run in the background and consume your system resources. So, disabling those features via Command Prompt does make sense. To remove Windows features via Command prompt, you need to follow some of the simple steps below. So, let's check out how to add or remove Windows features via Command prompt. Step 1
  4. The features for .NET 3.5, 3.0 and 2.0 as well as PowerShell Version 2 are removed in a standard build of Windows Server 2012 R2 and later. In theory, these features should be acquired from Microsoft through Windows Update by default with no action on your part. In practice this happens sometimes but not others. I have witnessed it.
  5. After this operation all those removed features no more listed in dism /online /get-features. After everything was completed and I removed all ~10 broken packages, I made in-place upgrade (upgrade win 1803 to win 1803, using iso). After installation finished (took 1 hour), all missed features were restored to their original (e.g. enabled) state. This is an my solution. Stanzilla MDL Novice.

How to Add and Remove Win 10 Features on Demand

I used the following DISM commands to enable the feature again: DISM /Online /Enable-Feature:MicrosoftWindowsPowerShell /all. With PowerShell enabled, it should be a breeze to fix the server some more. Keep in mind that this server still had its source files. There are methods to add or remove the source files. Concludin Install RSAT in Windows 10 with DISM. Another method to install RSAT is to use DISM Command. Here is how: Type cmd in search bar. Then right-click Command Prompt and select Run as administrator. If you receive User Account Control prompt, click Yes. At command prompt, type this command. Then press enter In Windows 8 dism.exe has built-in command-line extensions to remove superseded updates from Windows 8 image files. Earlier versions of Windows do not have this feature. So when you integrate packages into a windows installation media (w60 or w61), superseded or outdated packages reside in the deployment image and use unneccessary space. This. Pastebin.com is the number one paste tool since 2002. Pastebin is a website where you can store text online for a set period of time WIN10 N 20h2 Unable to Install Media Feature Pack - DISM Error: 1009 The configuration registry database is corrupt. A. ArtemisHacks Member. Joined Mar 20, 2021 Posts 5. Mar 20, 2021 #1 Hello, I ran into this issue today after trying to launch a game on my PC which apparently required mfplat.dll which was missing. After looking online it was clear that I did not have the Media Feature Pack.

I LOVE

How to enable or disable DotNet Framework (NetFx3) via

If the ScanHealth command-line finds the component store is healthy, it removes the corrupt and unserviceable values in the registry automatically, thereby marking the component store as healthy. The operations are logged on to the file dism.log. Note: The DISM CheckHealth command-line was completed in less than 10 seconds. Whereas the. DESCRIPTION: DISM enumerates, installs, uninstalls, configures, and updates features. and packages in Windows images. The commands that are available depend. on the image being serviced and whether the image is offline or running. GENERIC IMAGING COMMANDS: /Split-Image - Splits an existing .wim file into multiple The command will uninstall and remove features and convert Server GUI to Server Core. After restarting the system, you will see your old Server core with only one opened a command prompt. Method #2: Convert Server Core to Full Gui using DISM. Deployment Image Servicing and Management (DISM.exe) is a command-line tool that can be used to service a Windows image or to prepare a Windows. DISM.exe. Deployment Image Servicing and Management tool. DISM enumerates, installs, uninstalls, configures, and updates features and packages in Windows images. The commands that are available depend on the image being serviced and whether the image is offline or running (online) I haven't encountered this, yet, when removing Adobe Flash Player. I'll keep this in mind. It's true you can't delete system files even with Everyone having full control, unless you remove the System file attribute using attrib. That's not just in the old days, sometimes it is still the case these days :) Nice find

【ストリートピアノ】「I LOVEPost Fordism in its Micro Dimensions - YouTube

Adding or removing features with Powershell (or Dism

Features on Demand - allows us to remove unused Windows components from the disk. Finally, enable NTFS compression on the WinSxS folder - a way to reduce the size of the WinSxS directory using the built-in compression of the NTFS file system. Steps to Clean Up and Compress WinSxS Folder on Windows Server/Windows 10. Firstly, get the current size of the WinSxS folder on Windows by opening. When you use Turn Windows feature on or off in Control panel, Windows tries to download necessary files from Windows Update. In some cases it does not work. So I have to use offline method with DISM tool. TechNet offers a good description in this article Enable or Disable Windows Features Using DISM. You need to work only Online. Offline means to prepare an image from which you will. [Tip] How to Delete and Disable Reserved Storage in Windows 10? There might be many Windows 10 users who may not like the concept of Reserved Storage feature and may want to deactivate and disable Reserved Storage to free up disk space. In past, users needed to use Registry tweaks to disable and remove Reserved Storage feature (the required registry tweak has been given at above mentioned link. You can drive yourself mad with this stuff. There's loads of blog posts and StackOverflow questions and answers about this, but I didn't find anything that quite addressed it for me, so as a quick not In this video we use DISM tool to add and remove Windows Server Backup feature.Presented by Mohamed Sayedhttps://www.facebook.com/ITNetworksWay/Share, Like,.

4 Ways To Enable/Disable Optional Windows Feature

I tried dism /enable-feature but it says it cannot find specified name. I run dism /analyzecomponentstore and it says I have about 400 megs of backup and disabled features. Manifests of NetFx are still present in winsxs. I would like to restore NetFx mainly for digging in the system even more with PowerShel If you run the /Get-Features command again, you'll now see that the feature has a status of Disabled with Payload Removed instead of just Disabled. That's how you know it's not taking up space on your computer's hard drive The DISM /Add-Package command works with CAB files to add (or remove) packages from a targeted Windows image. CAB files may be used to accommodate updates, language packs, and Windows features and functions. To run DISM in general and to work with packages in particular, you must be logged in with administrative privileges. You can run DISM in either a Command Prompt (Administrator) window, or.

When will DISM get it's /remove groove on? - Microsoft

Wenn Windows 8/8.1/10 beschädigt ist, kann man den Dateistatus mittels des Befehls dism überprüfen und reparieren lassen. Vor ein paar Tagen gab es hier im Blog einen Beitrag, der die dism-Befehle zusammen fasste. Manchmal findet dism aber die zur Reparatur benötigten Dateien nicht. Hier ein paar I Feature installation: Installation of one or more roles, role services, or features failed. Message indicating .NET Framework 3.5 installation failed on Windows Server 2012 R2 This is always the point where I remember that I shouldn't have ignored the warning in the installation wizard's previous screen During a Windows 10 Feature Update deployment, you may want to uninstall or rollback to the previous Windows 10 version. A Windows 10 Rollback is wanted for example because the user runs into a problem after the Windows 10 Feature Update deployment. The Windows 10 Rollback action can be initiated by SCCM or Microsoft Intune. However, there's a couple of catch that I found when I was asked to. You can try to run DISM again on Windows 10. Method 3: Run SFC /SCANNOW tool. SFC /SCANNOW can also fix the corrupted files. You can try it first and run DISM again. Step 1. Run cmd as administrator. Step 2. Type sfc /scannow in the command prompt window and hit Enter. Step 3. Run DISM again. Method 4: Run CHKDSK too

【叩いてみた】Official髭男dism ドラム10曲メドレー - YouTubeEnable恋の前ならえ/Official髭男dism(こまき) - YouTube

If DISM failed on your system, you might be able to fix the problem simply by disabling certain antivirus features or by disabling your antivirus altogether. If that doesn't help, you can try removing your antivirus. Once you remove your antivirus, repeat the DISM scan again. If removing the antivirus solves your problem, you should consider switching to a different antivirus software. There. Trying to remove the most recent packages gave me errors. None of them were successfully removed. Snapshots below of the results of my inputs. Attaching a full log of my inputs, plus the dism log. Alternatively, you can use the Deployment Image Servicing and Management (DISM) command-line tool to enables the .NET Framework 3.5 feature without internet connection as the following: Note : Deployment Image Servicing and Management (DISM) is a command-line tool that is used to mount and service Windows images before deployment. for more details check DISM - Deployment Image Servicing and. DISM /Remove-Package und Remove-WindowsPackage entfernen Updatepakete, die als CAB-Datei bereitgestellt wurden. Für das Entfernen von Rollen und Features einschließlich der Quelldateien wäre Remove-Feature besser. Das Cmdlet wurde in Windows Server 2012 jedoch durch Uninstall-WindowsFeature ersetzt. Ich habe die Aufgabe nun etwas abgeändert und das Cmdlet Remove-WindowsFeature in Antwort B. Using DISM to Fix Corrupt Windows System Files (Image Credit: Russell Smith) In the example above, DISM uses Windows Update to replace any corrupt files when the /Restorehealth switch is specified Found it m8. To remove a language pack using DISM. 1. Locate the Windows image (.wim) file that contains the Windows images that you intend to remove languages from